nanopool Claymore-Dual-Miner releases Miners - Myanmar Crypto Mining

Myanmar Crypto Mining

Start crypto coin mining my record note.

Hot

Jan 13, 2018

nanopool Claymore-Dual-Miner releases Miners



Assets
  • added assembler kernels for ETH+LBC mining mode (AMD cards only), major speedup for LBC.
  • about 1% ETH speedup for Vega cards.
  • fixed issues with voltage/clocks management for latest AMD blockchain drivers (not completely).
  • new GPU sorting method for NVIDIA cards. Now GPUs are sorted by physical bus index (it matches AfterBurner list of GPUs).
  • for ETH+LBC mining mode maximal "dcri" value is 1000 now.
  • added "-platform" option.
  • added "ESTALE" option support in failover file epools.txt (see "-estale" option for details).
  • several minor bug fixes and improvements.
Assets
  • added Vega cards support (ASM mode).
  • added fan/OC support for 17.7.2 (and higher) drivers.
  • fixed issue with -ttli and -ttdcr option for Nvidia cards.
  • improved support for systems with more than 10 GPUs, check readme for "-di" and "-mode" options description for details.
  • a few minor bug fixes and improvements.
Assets
Latest version is v9.7:
  • Added ASM mode for RX460/560 cards, up to 30% speedup for second coin in dual mode.
  • Improved ETH speed for some Nvidia cards.
  • Improved speed in dual mode for Nvidia cards.
  • reduced initialization time.
  • a few minor bug fixes and improvements.
  • EthMan: added ability to select several rigs.
  • EthMan: several minor bug fixes and improvements.
Assets
Latest version is v9.6:
  • new GPU sorting method for AMD cards. Now GPUs are sorted by physical bus index (it matches AfterBurner list of GPUs). Also the list of temperatures/fans matches the list of GPUs automatically.
    Therefore "-di detect" and "-gmap" options are not necessary and not supported anymore.
    WARNING: be careful if you use use separate overclock/temperature settings for every card, due to new sorting method GPUs can get different indexes!
  • added "-minspeed" option to restart miner/system if miner cannot reach specified speed.
  • now watchdog monitors initialization steps too, e.g. it will restart miner even if miner hangs at GPUs initialization.
  • added "-allcoins etc" option for ETC pools that require Username.Worker, in this mode devfee will be mined on some default ETC pools and DAG will not be recreated.
  • added current DAG size info when "s" key is pressed.
  • added 1 minute average speed for ETH when "s" key is pressed.
  • fixed connection timeout issue in Linux version.
  • fixed some issues related to remote management via TCP/IP.
  • added "-ejobtimeout" and "-djobtimeout" options.
  • fixed epoch #0 support.
  • a few minor bug fixes and improvements.
  • EthMan: fixed issue with lost connection to some rigs.
  • EthMan: added password for webserver.
  • EthMan: added separate settings for every event.
  • EthMan: added "retrigger" option for lost connection event.
Assets
Latest version is v9.5:
  • fixed issue with PASC, miner could check some nonces twice. Effective hashrate must be a bit higher now.
  • improved SIA support for Nicehash, added "mining.extranonce.subscribe" and "client.reconnect" commands support. Effective hashrate must be a bit higher now.
  • a few minor bug fixes and improvements.
  • EthMan: added ability to enable/disable GPUs remotely (see API.txt for tech details).
  • EthMan: added notification for too high fan speed.
  • EthMan: several minor bug fixes and improvements.
  • v9.4
Assets
Latest version is v9.4:
  • improved fans management for latest drivers and Polaris cards.
  • added "-mpsw" option.
  • added shares-per-GPU statistics when "s" key is pressed.
  • Included EthMan v3.0 which supports passwords and email notifications.
Assets
  • improved dual mining speed stability in ASM mode.
  • added "-altnum" option for alternative GPU indexing.
  • a few minor bug fixes and improvements.
Assets
  • improved mining speed stability.
  • added changes in DCR mining protocol.
  • fixed possible issue with rejected DCR shares on Nicehash pool.
  • added pool selection in runtime ("e" and "d" keys).
  • now if devfee mining fails for a long time, miner will not stop mining, it will turn on "-nofee" option temporarily with appropriate warnings, until successful devfee mining.
  • some minor improvements.
  • EthMan: added ReasonID parameter to .bat file which is executed when some rig has problems, check "sample.bat" for details.
Assets
  • added assembler kernels for ETH+SIA and ETH+PASCAL modes (major speedup for SIA and PASCAL).
  • added alternative assembler kernels for Tonga and Polaris cards for ETH-only mode. Use them if you get best speed at "-dcri 1" (i.e. you cannot find speed peak), use "-asm 2" option to enable this mode.
  • a few minor bug fixes and improvements.
Assets
  • added "-asm" option (AMD cards only) which enables assembler GPU kernels. In this mode some tuning is required even in ETH-only mode, use "-dcri" option or or "+/-" keys in runtime to set best speed.
    Currently only ETH-only and ETH-DCR modes are supported in assembler. Use "-asm 0" if you don't want to use new assembler kernels.
    If ASM mode is enabled, miner must show "GPU #x: algorithm ASM" at startup.
  • improved ETH mining speed in ASM mode for some cards, also a bit reduced power usage for some cards (fine-tuning is required via "-dcri" or "+/-" keys in runtime).
    NOTE 1: if GPU throttles, best "-dcri" value is different.
    NOTE 2: speed peak can be rather short, so change "-dcri" value slowly.
  • dramatically increased DCR mining speed in assembler mode (up to 70%). Be careful, power usage is higher too.
  • added "-gmap" option.
  • fixed DCR Nicehash support.
  • added "FINE-TUNING" section to Readme file.
  • A lot of minor improvements and bug fixes.

No comments:

Post a Comment